banner
Certification
Non-Condensable Gas Purge Equipment for Use With Low Pressure Centrifugal Liquid Chillers

Certification Program
Find AHRI Certified® Non-Condensable Gas Purge Equipment for Use With Low Pressure Centrifugal Liquid Chillers


Resources
Related Standard
Product-Specific Operations Manual
General Operations Manual



Program Scope
This program applies to Non-Condensable Gas Purge Equipment for Use With Low Pressure Centrifugal Liquid Chillers as defined below, for which published ratings are available, and which can be tested in the Independent third-party laboratory contracted by AHRI (Laboratory).

A device, used with low pressure centrifugal liquid chillers used to separate non-condensable gases from refrigerant and remove them from the refrigeration system. If the purge device contains a secondary separation media, the following types are defined within the standard:
  • Automatically Regenerated Media. Media that is recycled at the purge system to remove entrained refrigerant and return this refrigerant to the chiller. The regeneration process is initiated automatically by the purge control system.
  • Manually Regenerated Media. Media that is recycled at the purge system to remove entrained refrigerant and return this refrigerant to the chiller. The regeneration process is setup and initiated by an operator.
  • Replaceable Media. Media that is removed from the system and replaced with new or recycled media. The media from the system is processed to ensure refrigerant is not released to the atmosphere.

Certified Ratings
  • Concentration, ratio of mass of refrigerant to mass of air, g of refrigerant/g of air
  • Refrigerant Holding Capacity where applicable, g


The rules and procedures for obtaining and maintaining certification are detailed in the Resources section above. The specific Standard listed above details the technical requirements for rating and publishing your product performance, the AHRI General Operations Manual (OM) details the program operational rules that are generic to all of AHRI’s certification programs and lastly, the Product-specific Operations Manual provides the operational rules that are specific to this program along with the required documents and fees. Please ensure that you are familiar with the latest rules and procedures for this program.