Forced Circulation Air-Cooling & Air-Heating Coils (ACHC)

Program-specific Forms

Appendix A. Data Sheets

• Form ACHC-DS1, ACHC Certification Program Data Submittal. Complete this worksheet to provide information and data for each model certified shall be published in the Directory.
• Form ACHC-DS2, Coil Inputs Submittal. Use this form for the following:
  • Challenge Test
  • Request for Verification.
• Form ACHC-DS3, Re-rate Check Worksheet. Complete and return this worksheet when submitted software revised after a re-rate.

Appendix D. 410 Forms

• Form 410-1, Calculation Procedure To Determine Fin Efficiencies and Metal Thermal Resistance
• Form 410-2, Calculation of Air-Side Resistances from Steam and Water Coil Tests
• Form 410-3, Calculation of Tube-Side Pressure Drops from Steam and Water Coil Tests
• Form 410-4, Calculation of Refrigerant-Side Thermal Resistances from Volatile Refrigerant Coil Tests
• Form 410-5, Suggested Form for Rating Calculation Procedure for Sensible Heat Air Coils
• Form 410-6, Suggested Form for Rating Calculation Procedure for Cooling and Dehumidifying Coils
• Form 410-7, Calculation  of Heat Transfer Coefficient and Friction Factor for Ethylene Glycol Coils
• Form 410-8, Suggested Form for Rating Calculation Procedure for Sensible Heat Air Coils with Ethylene Glycol Solutions
• Form 410-9, Suggested Form for Rating Calculation Procedure for Cooling and Dehumidifying Coils with Ethylene Glycol Solutions

Operations Manuals

• Product-Specific Operations Manual (May 22)
• General Operations Manual

Related Standard(s) and Documents

• AHRI Standard 410 (SI/I-P), Performance Rating of Forced-circulation Air-Cooling and Air-Heating Coils
• AHRI Standard 410-2001 with Addendum 1, Forced-Circulation Air-Heating and Air-Cooling Coils
   

This program applies to Forced-Circulation Air-Cooling Coils under non-frosting conditions and Forced-Circulation Air-Cooling and Air-Heating Coils only intended for:

• Field installation (built-up systems and duct-mounted coils); and
• Use in central station air-handling units.

• Average total cooling or heating capacity, Btu/h [W]
• Air pressure drop through coil at standard air density, in H₂O [kPa]
• Water, aqueous ethylene or propylene glycol solutions pressure drop through coil (including headers) at average fluid density, ft of fluid [m of fluid]